_REDRAW AND ADD A BUTTON AND A LED
- DESCRIPTION AND PICTURES OF PROCESS
STEP1-The start of this assigment was in some how confuse, because we still had things to do or learn fron the assigment 4, but with the tutorials of the class we start to download the eagle software for electronic design. From the class we see that there where more programs to do this but, we start with eagles basacally, becuase there where the libreries of the assigment.
to see how it work I found this toturials in Youtube that were very helpful
https://www.youtube.com/watch?v=1AXwjZoyNno
STEP2- In this step, mainly was to start to found and undertand the infinty of components and there variants
STEP3-Ones that we found the components, I start to drop them in the schematic layer and start to connect them as the tutorial was telling.
STEP4- After finishing the schematic composition of the Hello board we press the button of swich to board layer, in where we arrage the components as we design it with the reference of the yellow lines that are the link between them. Ones that is already arrage, we pass to autorouter funtion , this funtion fisrt you have to put the parameters of drawing, as thin of vias and spacing between them, and them, see all the compositions that Eagle make, choosing the one that have the full % and the less complicate vias to mill.
STEP5- Now that we have the design that we like and work, we export the images to png and start the process of milling the PCB board-
STEP 6- With the vector file also you cam modify something to the board for better and cleaner milling.
STEP7- As in the assigment 4 we start the process of solding the components and see if it don have dirty in the vias and start to programm it and try to make it work.
STEP8- This is my final PCB HELLO WORLD R
